All Parts

SUBURBAN SW10P · ALL PARTS

All SW10P parts

21 replacement parts for the Suburban SW10P. 10 gallon, LP gas only, pilot ignition, porcelain-lined steel tank (uses an anode rod), 16-7/32" square cutout.

✓ FIT CHECK

Not sure which part fits? Send us your model and serial number from the data plate and we’ll confirm it before you order.

Every SW10P part we carry, by type:

Part typePart #Description
Igniter Electrode232602Reignitor Electrode and Wire
Gas Valve161111Gas Valve
Thermostat525007High Temp 12VDC Thermostat
Pressure Relief Valve525045Pressure & Temperature Relief Valve – 3/4" NPT
Gas Burner11030011030 Burner Assembly
Thermocouple525012161156 / Pilot Burner & Thermocouple Assembly
Access Door6259 Water Heater Access Door | all colors
High Altitude Orifice180260High Altitude Burner Orifice
Door Part030986Access Door Grille
Gas Fitting171422Manifold Outlet, Pilot
Hardware525027Thermostat Cover Grommet Service Kit
Insulation520869Foam Jacket and Banding Kit, 10 Gallon
Thermostat525002High Temp 120V Thermostat
Thermal Cut-Off (ECO)525022Thermostat / Hi-Limit Switch Cover
Hardware070805Electric Element Gasket
High Altitude Orifice525023Burner with Orifice – SW-Series Water Heaters
Insulation101781Insulation
Hardware070987Thermostat Cover Gasket
Gas Fitting171393Gas Inlet Elbow, 40 Degree, SW10 Pilot
Hardware070989Gas Inlet Grommet
Hardware063444Burner Bracket

Model and serial number: on the silver data plate on the right side of the control housing, behind the outside access door.

Suburban SW10P Water Heater Parts

Every replacement part we carry for the Suburban SW10P in one list. The Suburban SW10P is a 10-gallon LP-gas-only Suburban tank water heater with standing pilot ignition (10.2 gal/hr recovery)..

All parts we carry for the Suburban SW10P

See all Suburban SW10P parts

To verify compatibility, contact Suburban directly with your water heater model and serial number.

21 Products