Igniter Pins

GIRARD · RV WATER HEATER PARTS

Girard Igniter Pins

1 Girard igniter electrodes for RV water heaters. Cheap and the most common ignition fix. Check the gap and look for cracks.

✓ FIT CHECK

Not sure which part fits? Send us your model and serial number from the data plate and we’ll confirm it before you order.

Shop by part number

Girard 2GWH-14/ 2022107569 Igniter/ Sparker Pin (fits the GSWH-2 Tankless Water Heaters) Part # 2GWH-14Igniter/ Sparker Pin →Fits GSWH-2

Which igniter electrode fits my water heater?

Part #Fits these models
2GWH-14GSWH-2

Not listed? Send us your model and serial number.

Signs it’s time to replace

  • Spark is weak, yellow or jumps somewhere other than the burner
  • Cracked white ceramic insulator
  • Tip is burned back or covered in carbon
  • Burner lights then goes out (flame not sensed)

Tip: Set the spark gap to spec when you install it. Clean the burner tube at the same time.

Guide: Atwood / Dometic won’t light: lockout light and fixes

Common questions

Which igniter electrode fits my Girard water heater?

Find your model in the table above, or match the part number printed on your old part. Several parts changed at serial number breaks, so send us your model and serial number if you are unsure.

1 Products