-
-
-
-
-
-
-
Suburban Mfg
Suburban 525001 Electric Element Switch with Gasket – SW-Series Water Heaters
$19.79$18.00 -
Suburban Mfg
Suburban 090681 Electric Element Cover with Gasket – SW Series Water Heaters
$19.79$18.00 -
-
-
-
-
SW4DE

Everything for the Suburban SW4DE
4 gallon, LP gas + 120V electric, direct spark ignition (DSI), porcelain-lined steel tank (uses an anode rod). 13 replacement parts listed below.
✓ FIT CHECK
Not sure which part fits? Send us your model and serial number from the data plate and we’ll confirm it before you order.
What’s wrong with your SW4DE?
Works on propane, not electricAC Heating Element 520900 →The 120V element that heats water on shore power.
No power to gas or electric sideSwitch 233110 →Power and element switches wear out and corrode.
Rusty or rotten-egg smelling waterAnode Rod 233514 →Protects a steel tank from rust. Check it every season.
Relief valve dripping or stuckPressure Relief Valve 525045 →A safety valve. Some dripping after heating is normal.
Yellow, sooty or weak flameGas Burner 11030 →Spiders and rust block the burner tube.
Weak or missing sparkElectrode Wire 232456 →Carries high voltage from the board to the electrode.
Soot or exhaust problemsFlue & Combustion Part 101607 →Flue tubes, baffles and vent parts that move exhaust out.Key part numbers for the Suburban SW4DE:
| Part | Part number(s) for the SW4DE |
|---|---|
| AC Heating Element | 520900 |
| Switch | 233110 |
| Anode Rod | 233514 |
| Pressure Relief Valve | 525045 |
| Gas Burner | 11030 |
| Electrode Wire | 232456 |
| Flue & Combustion Part | 101607 |
Find your model and serial number on the silver data plate on the right side of the control housing, behind the outside access door.
Common questions
Does the SW4DE need an anode rod?
Yes. It has a porcelain-lined steel tank, so the anode rod protects it from rust. Inspect it every time you drain the tank and replace it when it is about 75% gone (233514).
Why does my SW4DE work on propane but not electric?
The usual causes are a burned-out heating element, a failed electric-side thermostat or ECO, a bad switch, or a tripped breaker. Test the element for continuity with the power off. Step-by-step guide.
Where is the model and serial number on the SW4DE?
It is on the silver data plate on the right side of the control housing, behind the outside access door. Several parts changed at serial number breaks, so have both numbers ready when you order.