Description
Suburban Water Heater Electrode Wire 232456
The Suburban 232456 Electrode Wire is an electrode wire (high-voltage lead) that carries the spark to the electrode. It is a genuine OEM replacement part.
Part Number: 232456
Fits
Fits standard Suburban D-series direct spark ignition water heaters. DM/DEM marine models use 232313 instead.
- SW4D
- SW4DE
- SW4DEL
- SW6D
- SW6DE
- SW6DEL
- SW10D
- SW10DE
- SW10DEL
- SW12D
- SW12DE
- SW12DEL
- SW16D
- SW16DE
- SW16DEL
- SAW6D
- SAW6DE
- SAW6DEL
Specifications
- With boot and spade connector
- Brown
Why Replace It
A cracked, burned or loose electrode wire weakens or stops the spark, causing ignition failures.
Installation
Turn off power. Unplug the old wire at both ends, route the new wire the same way away from hot surfaces, and plug it in firmly.
Estimated Installation Time
5 to 10 minutes
Tools Required
None usually
FAQ
Will this fit my water heater?
Check the model and serial number on your water heater's rating plate against the fit list above. If you're not sure, send us your model and serial number and we'll confirm the fit before you order.
