Igniter Electrode

SUBURBAN SW4DE · IGNITER ELECTRODE

SW4DE Igniter Electrode

0 parts that fit the Suburban SW4DE (4-gal gas/electric).

✓ FIT CHECK

Not sure which part fits? Send us your model and serial number from the data plate and we’ll confirm it before you order.

Signs the igniter electrode is bad

  • Spark is weak, yellow or jumps somewhere other than the burner
  • Cracked white ceramic insulator
  • Tip is burned back or covered in carbon
  • Burner lights then goes out (flame not sensed)

Before you order

Set the spark gap to spec when you install it. Clean the burner tube at the same time.

Your model and serial number are on the silver data plate on the right side of the control housing, behind the outside access door. Ask us to confirm fit.

Guide: Won’t light on propane (DSI): step-by-step

Common questions

How do I know the igniter electrode on my SW4DE is bad?

Spark is weak, yellow or jumps somewhere other than the burner. Cracked white ceramic insulator. Tip is burned back or covered in carbon. Read the guide.

0 Products

There are no products listed under this category.