GSWH-2

Everything for the Girard GSWH-2
Tankless (on-demand), 42,000 BTU max. 16 replacement parts listed below.
✓ FIT CHECK
Not sure which part fits? Send us your model and serial number from the data plate and we’ll confirm it before you order.
What’s wrong with your GSWH-2?
Won’t light / lockout after 3 triesControl Board 2GWH-8 →Runs the spark and gas valve. Rule out 12V, gas and the electrode first.
Clicking or sparking, no flameIgniter Electrode 2GWH-14 →Cheap and the most common ignition fix. Check the gap and look for cracks.
Sparks but no gas flowGas Valve 2GWH2 →Opens when the board calls for heat. Check 12V at the coil first.
Water too hot, or not hot enoughThermostat 2GWH27 →Holds water temperature. Most also include the ECO high-limit.
Yellow, sooty or weak flameGas Burner 2GWH15 →Spiders and rust block the burner tube.
Won’t fire when water is runningWater Flow Sensor 2GWH-24 →Tells a tankless unit that water is flowing so it can light.
Door cracked, faded or lostAccess Door →Sized by tank and by flush vs. radius style.
Fan noise or won’t ventBlower Motor 2022107592 →Moves combustion air on tankless units.Key part numbers for the Girard GSWH-2:
Find your model and serial number on the data plate on the unit.
Repair guides for the GSWH-2
Common questions
What control board does the GSWH-2 use?
The Girard GSWH-2 uses 2GWH-8. Before replacing it, confirm 12V at the board, good gas pressure and a clean, correctly gapped electrode.
What should I check first when the GSWH-2 won’t heat?
Make sure the gas is on, the 12V supply is good and water flow is high enough to start the burner. Clean the inlet screen, then check the error code on the control.
Where is the model and serial number on the GSWH-2?
It is on the data plate on the unit. Several parts changed at serial number breaks, so have both numbers ready when you order.