WH-6GA
Everything for the Dometic WH-6GA
6 gallon, LP gas only, direct spark ignition (DSI), aluminum tank (no anode rod needed), about 12-7/8" square cutout (WH series). 8 replacement parts listed below.
✓ FIT CHECK
Not sure which part fits? Send us your model and serial number from the data plate and we’ll confirm it before you order.
What’s wrong with your WH-6GA?
Won’t light / lockout after 3 triesControl Board 91367 →Runs the spark and gas valve. Rule out 12V, gas and the electrode first.
Sparks but no gas flowGas Valve 92100 →Opens when the board calls for heat. Check 12V at the coil first.
Water too hot, or not hot enoughThermostat 91447 →Holds water temperature. Most also include the ECO high-limit.
Door cracked, faded or lostAccess Door 94900-94905 →Sized by tank and by flush vs. radius style.
Rebuild the ignition in one goIgniter Service Kit 92104 →Bundles the wear parts so you only open it up once.
Loose door or broken latchDoor Part 92101 →Latches, hinges and frames for the outside access door.
Missing screws, brackets or gasketsHardware 92069 →Brackets, screws, gaskets and covers.Key part numbers for the Dometic WH-6GA:
| Part | Part number(s) for the WH-6GA |
|---|---|
| Control Board | 91367 |
| Gas Valve | 92100 |
| Thermostat | 91447 |
| Access Door | 94900-94905 |
| Igniter Service Kit | 92104 |
| Door Part | 92101 |
| Hardware | 92069 |
Find your model and serial number on the data plate, visible with the outside access door open.
Common questions
What control board does the WH-6GA use?
The Dometic WH-6GA uses 91367. Before replacing it, confirm 12V at the board, good gas pressure and a clean, correctly gapped electrode.
Does the WH-6GA need an anode rod?
No. It has an aluminum tank, and the tank itself does the job of an anode. Drain and flush it at least once a year and before freezing weather. Don’t install a metal plug or an aftermarket element in the drain opening.
Where is the model and serial number on the WH-6GA?
It is on the data plate, visible with the outside access door open. Several parts changed at serial number breaks, so have both numbers ready when you order.