-
Suburban Mfg
Suburban 521299 Water Heater Recirculation Pump Kit, Nautilus IW60RL (fits IW60RL)
$106.94 -
-
-
Suburban Mfg
Suburban 233307 Water Heater Freeze Protection Valve, Nautilus IW60 (fits IW60)
$154.43 -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Suburban Mfg
Suburban 162252 Water Heater Digital Control Center (fits Nautilus IW60) - White
$139.99$109.10
Nautilus IW60

Everything for the Suburban Nautilus IW60
Tankless (on-demand). 24 replacement parts listed below.
✓ FIT CHECK
Not sure which part fits? Send us your model and serial number from the data plate and we’ll confirm it before you order.
What’s wrong with your Nautilus IW60?
Won’t light / lockout after 3 triesControl Board 521135 →Runs spark and gas. Rule out 12V, gas and the electrode first.
Clicking or sparking, no flameIgniter Electrode 233245 →Cheap and the most common ignition fix. Check the gap and look for cracks.
Sparks but no gas flowGas Valve 161248 →Changed at a serial break. Check your serial before ordering.
No power to gas or electric sideSwitch 233229 →Power and element switches wear out and corrode.
Relief valve dripping or stuckPressure Relief Valve 161250 →A safety valve. Some dripping after heating is normal.
Won’t fire when water is runningWater Flow Sensor 233237 →Tells a tankless unit that water is flowing so it can light.
Soot or exhaust problemsFlue & Combustion Part 260638 →Flue tubes, baffles and vent parts that move exhaust out.
Getting ready for freezing weatherWinterizing Part 233307 →Bypass kits, drain valves and freeze protection.Key part numbers for the Suburban Nautilus IW60:
Find your model and serial number on the left front edge of the cabinet (9-digit serial ending in Z).
Common questions
What control board does the Nautilus IW60 use?
The Suburban Nautilus IW60 uses 521135. Before replacing it, confirm 12V at the board, good gas pressure and a clean, correctly gapped electrode.
What should I check first when the Nautilus IW60 won’t heat?
Make sure the gas is on, the 12V supply is good and water flow is high enough to start the burner. Clean the inlet screen, then check the error code on the control. Error code guide.
Where is the model and serial number on the Nautilus IW60?
It is on the left front edge of the cabinet (9-digit serial ending in Z). Several parts changed at serial number breaks, so have both numbers ready when you order.