Atwood GCH6
Everything for the Atwood GCH6
6 gallon, LP gas + 120V electric, engine heat exchanger (Motor Aid), aluminum tank (no anode rod needed). 2 replacement parts listed below.
✓ FIT CHECK
Not sure which part fits? Send us your model and serial number from the data plate and we’ll confirm it before you order.
What’s wrong with your GCH6?
Water too hot, or not hot enoughThermostat 93105 →Holds water temperature. Most also include the ECO high-limit.
Yellow, sooty or weak flameGas Burner 91638 →Spiders and rust block the burner tube.Key part numbers for the Atwood GCH6:
| Part | Part number(s) for the GCH6 |
|---|---|
| Thermostat | 93105 |
| Gas Burner | 91638 |
Find your model and serial number on the data plate, visible with the outside access door open.
Common questions
Does the GCH6 need an anode rod?
No. It has an aluminum tank, and the tank itself does the job of an anode. Drain and flush it at least once a year and before freezing weather. Don’t install a metal plug or an aftermarket element in the drain opening.
Why does my GCH6 work on propane but not electric?
The usual causes are a burned-out heating element, a failed electric-side thermostat or ECO, a bad switch, or a tripped breaker. Test the element for continuity with the power off. Step-by-step guide.
Where is the model and serial number on the GCH6?
It is on the data plate, visible with the outside access door open. Several parts changed at serial number breaks, so have both numbers ready when you order.