Atwood GCH10

YOUR WATER HEATER: ATWOOD GCH10

Everything for the Atwood GCH10

10 gallon, LP gas + 120V electric, engine heat exchanger (Motor Aid), aluminum tank (no anode rod needed). 0 replacement parts listed below.

✓ FIT CHECK

Not sure which part fits? Send us your model and serial number from the data plate and we’ll confirm it before you order.

Common questions

Does the GCH10 need an anode rod?

No. It has an aluminum tank, and the tank itself does the job of an anode. Drain and flush it at least once a year and before freezing weather. Don’t install a metal plug or an aftermarket element in the drain opening.

Why does my GCH10 work on propane but not electric?

The usual causes are a burned-out heating element, a failed electric-side thermostat or ECO, a bad switch, or a tripped breaker. Test the element for continuity with the power off. Step-by-step guide.

Where is the model and serial number on the GCH10?

It is on the data plate, visible with the outside access door open. Several parts changed at serial number breaks, so have both numbers ready when you order.

Time for a new water heater? If the tank is leaking or repairs cost more than the heater is worth, our replacement guide covers sizes and cutouts, or shop 10 gallon RV water heaters.
0 Products

There are no products listed under this category.