-
-
-
Dometic
Dometic/ Atwood 91363 Water Heater Ignition Control Board (replaces older Atwood boards)
$279.99$236.55
GH6-7 & GH6-8E
Everything for the Atwood GH6-7 & GH6-8E
6 gallon, LP gas only, pilot or direct spark ignition (DSI) (by version), engine heat exchanger (Motor Aid), aluminum tank (no anode rod needed). 3 replacement parts listed below.
✓ FIT CHECK
Not sure which part fits? Send us your model and serial number from the data plate and we’ll confirm it before you order.
What’s wrong with your GH6-7 & GH6-8E?
Won’t light / lockout after 3 triesControl Board 91363 →Runs the spark and gas valve. Rule out 12V, gas and the electrode first.
Sparks but no gas flowGas Valve 92078 →Opens when the board calls for heat. Check 12V at the coil first.
Shuts off and won’t restartThermal Cut-Off (ECO) 93866 →One-time safety fuse that opens on overheat.Key part numbers for the Atwood GH6-7 & GH6-8E:
| Part | Part number(s) for the GH6-7 & GH6-8E |
|---|---|
| Control Board | 91363 |
| Gas Valve | 92078 |
| Thermal Cut-Off (ECO) | 93866 |
Find your model and serial number on the data plate, visible with the outside access door open.
Common questions
What control board does the GH6-7 & GH6-8E use?
The Atwood GH6-7 & GH6-8E uses 91363. Before replacing it, confirm 12V at the board, good gas pressure and a clean, correctly gapped electrode.
Does the GH6-7 & GH6-8E need an anode rod?
No. It has an aluminum tank, and the tank itself does the job of an anode. Drain and flush it at least once a year and before freezing weather. Don’t install a metal plug or an aftermarket element in the drain opening.
Where is the model and serial number on the GH6-7 & GH6-8E?
It is on the data plate, visible with the outside access door open. Several parts changed at serial number breaks, so have both numbers ready when you order.