G10-2 & G10-3E

YOUR WATER HEATER: ATWOOD G10-2 & G10-3E

Everything for the Atwood G10-2 & G10-3E

10 gallon, LP gas only, pilot or direct spark ignition (DSI) (by version), aluminum tank (no anode rod needed). 2 replacement parts listed below.

✓ FIT CHECK

Not sure which part fits? Send us your model and serial number from the data plate and we’ll confirm it before you order.

What’s wrong with your G10-2 & G10-3E?

Dometic/ Atwood 91363 Water Heater Ignition Control Board (replaces older Atwood boards) Won’t light / lockout after 3 triesControl Board 91363 →Runs the spark and gas valve. Rule out 12V, gas and the electrode first. Dometic/ Atwood 93866 RV Water Heater Thermal Cut-Off Kit (ECO) Shuts off and won’t restartThermal Cut-Off (ECO) 93866 →One-time safety fuse that opens on overheat.

Key part numbers for the Atwood G10-2 & G10-3E:

PartPart number(s) for the G10-2 & G10-3E
Control Board91363
Thermal Cut-Off (ECO)93866

Find your model and serial number on the data plate, visible with the outside access door open.

Common questions

What control board does the G10-2 & G10-3E use?

The Atwood G10-2 & G10-3E uses 91363. Before replacing it, confirm 12V at the board, good gas pressure and a clean, correctly gapped electrode.

Does the G10-2 & G10-3E need an anode rod?

No. It has an aluminum tank, and the tank itself does the job of an anode. Drain and flush it at least once a year and before freezing weather. Don’t install a metal plug or an aftermarket element in the drain opening.

Where is the model and serial number on the G10-2 & G10-3E?

It is on the data plate, visible with the outside access door open. Several parts changed at serial number breaks, so have both numbers ready when you order.

Time for a new water heater? If the tank is leaking or repairs cost more than the heater is worth, our replacement guide covers sizes and cutouts, or shop 10 gallon RV water heaters.
2 Products