-
-
-
-
-
Suburban Mfg
Suburban 233667 Tankless Water Heater Ignition Electrode (fits the ST60/ ST42)
$25.79$18.00 -
-
-
-
-
Suburban Mfg
Suburban 233678 Water Heater Digital Control Center (fits the ST42 / ST60) - Black
$99.99$74.50
ST42 (tankless)
Everything for the Suburban ST42
Tankless (on-demand), 42,000 BTU max. 10 replacement parts listed below.
✓ FIT CHECK
Not sure which part fits? Send us your model and serial number from the data plate and we’ll confirm it before you order.
What’s wrong with your ST42?
Won’t light / lockout after 3 triesControl Board 521338 →Runs spark and gas. Rule out 12V, gas and the electrode first.
Clicking or sparking, no flameIgniter Electrode 233667 →Cheap and the most common ignition fix. Check the gap and look for cracks.
Sparks but no gas flowGas Valve 161357 →Changed at a serial break. Check your serial before ordering.
No power to gas or electric sideSwitch 233700 →Power and element switches wear out and corrode.
Won’t fire when water is runningWater Flow Sensor 233665 →Tells a tankless unit that water is flowing so it can light.
Door cracked, faded or lostAccess Door →Sized by tank and by flush vs. radius style.
Dead board or no electric sideFuse / Relay 233682 →A blown fuse or failed relay can look like a bad board.Key part numbers for the Suburban ST42:
| Part | Part number(s) for the ST42 |
|---|---|
| Control Board | 521338 |
| Igniter Electrode | 233667 |
| Gas Valve | 161357 |
| Switch | 233700 |
| Water Flow Sensor | 233665 |
| Access Door | |
| Fuse / Relay | 233682 |
Find your model and serial number on the data plate on the unit.
Common questions
What control board does the ST42 use?
The Suburban ST42 uses 521338. Before replacing it, confirm 12V at the board, good gas pressure and a clean, correctly gapped electrode.
What should I check first when the ST42 won’t heat?
Make sure the gas is on, the 12V supply is good and water flow is high enough to start the burner. Clean the inlet screen, then check the error code on the control. Error code guide.
Where is the model and serial number on the ST42?
It is on the data plate on the unit. Several parts changed at serial number breaks, so have both numbers ready when you order.