Description
Dometic/ Atwood Water Heater Electrode, Local Sense (Spark Probe) 93868
The Dometic/ Atwood 93868 Electrode, Local Sense (Spark Probe) is an igniter electrode that sparks to light the burner and, on many models, senses the flame. It is a genuine OEM replacement part.
Part Number: 93868
Fits
Fits Atwood electronic-ignition water heaters where spark and flame sense are on one 2-prong probe, and Atwood XT models. The remote-sense electrode is 91606.
- G6A-8E
- GC6AA-9E
- GC6AA-10E
- GCH6A-10E
- G10-3E
- GC10A-4E
- GCH10A-4E
Specifications
- 2-prong spark and sense electrode
- Local (single) sense
Why Replace It
A cracked, corroded or misaligned electrode causes no-spark conditions, delayed ignition or a heater that will not stay lit.
Installation
Turn off power and gas. Unplug the electrode wire, remove the old electrode, install the new one and check its gap and position over the burner.
Estimated Installation Time
10 to 20 minutes
Tools Required
Screwdriver or nut driver
FAQ
Will this fit my water heater?
Check the model and serial number on your water heater's rating plate against the fit list above. If you're not sure, send us your model and serial number and we'll confirm the fit before you order.
Do I need a technician?
No. Most owners can replace this part themselves by following the steps above. If you're not comfortable working on the propane system, you can always hire an RV technician to come out. If you need assistance with the install, we're here for you.
