Control Boards

ATWOOD GC10A-2, GC10A-3E & GC10A-4E · CONTROL BOARD

GC10A-2, GC10A-3E & GC10A-4E Control Boards

2 parts that fit the Atwood GC10A-2, GC10A-3E & GC10A-4E (10-gal gas/electric). Part numbers: 91363, UIB64.

✓ FIT CHECK

Not sure which part fits? Send us your model and serial number from the data plate and we’ll confirm it before you order.

Which control board do I need?

Dometic/ Atwood 91363 Water Heater Ignition Control Board (replaces older Atwood boards) Part # 91363Ignition Control Board → Universal Ignitor Board UIB64 for Atwood RV Water Heaters Part # UIB64Universal Ignitor Board for Water Heaters →

Signs the control board is bad

  • No spark at all with good 12V at the board
  • Lockout light every time, even after the electrode and gas check out
  • Burnt spots, a swollen relay or corrosion on the board
  • Fuse on the board blows again right away

Before you order

Boards are model-specific. Match the part number printed on your old board, or send us your model and serial number.

Your model and serial number are on the data plate, visible with the outside access door open. Ask us to confirm fit.

Guide: Atwood / Dometic won’t light: lockout light and fixes

Common questions

Which control board fits the Atwood GC10A-2, GC10A-3E & GC10A-4E?

There are 2 options for the GC10A-2, GC10A-3E & GC10A-4E: 91363 and UIB64. Match the number on your old part, or send us your model and serial number to confirm.

How do I know the control board on my GC10A-2, GC10A-3E & GC10A-4E is bad?

No spark at all with good 12V at the board. Lockout light every time, even after the electrode and gas check out. Burnt spots, a swollen relay or corrosion on the board. Read the guide.

2 Products